Manufacturer: ABB
Product No.: 3HAB8101-8 DSQC 346G
Country of origin:Ireland
Product Type: Drive Unit
Barcode: 85044090
Payment: T/T, Western Union
Weight: 3140g
Shipping port: Xiamen
Warranty: 12 months
The ABB 3HAB8101-8 DSQC 346G is a DRIVE UNIT GT used within ABB robotics service and spare-parts applications.
ABB identifies the exact Product ID as 3HAB8101-8 and the type designation as DSQC 346G. The unit is classified by ABB under Robotics, Service, Spares and Consumables.
The 3HAB8101-8 is no longer offered for sale by ABB. ABB identifies CS-4003 as the replacement Product ID.
The unit has a listed net weight of 3.14 kg and originates from Ireland. For replacement work, the original Product ID and DSQC designation should be checked against the installed robot drive hardware before substitution.
ABB robotics drive unit
Product ID 3HAB8101-8
Type designation DSQC 346G
Official catalog description DRIVE UNIT GT
Classified as an ABB robotics service spare
Product lifecycle: no longer for sale
ABB replacement Product ID CS-4003
Country of origin Ireland
Net weight 3.14 kg
Supplied as a new part in the ABB product record
| Parameter | Specification |
|---|---|
| Product ID | 3HAB8101-8 |
| ABB Type Designation | DSQC 346G |
| Catalog Description | DRIVE UNIT GT |
| Replacement Product ID | CS-4003 |
| Minimum Order Quantity | 1 piece |
| Order Multiple | 1 piece |
| Selling Unit | Piece |
| Made To Order | No |
| Quote Only | No |
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Product ID | 3HAB8101-8 |
| Type Designation | DSQC 346G |
| Product Type | DRIVE UNIT GT |
| ABB Category | Robotics - Service - Spares and Consumables |
| Part Type | New |
| Country of Origin | Ireland |
| Product Net Weight | 3.14 kg |
| Gross Weight | 3.14 kg |
| Customs Tariff Number | 85044090 |
| WEEE Category | Product Not in WEEE Scope |
| Lifecycle | No longer for sale |
| Replacement Product | CS-4003 |
Verify the complete Product ID 3HAB8101-8 before removing the installed drive unit.
Confirm the existing hardware is identified as DSQC 346G.
Record all existing drive-unit connections before removal.
Isolate the robot controller from power before servicing drive hardware.
Inspect mating connectors and mounting points before installing the replacement.
Confirm the replacement drive unit matches the installed robot controller configuration.
Perform the required robot-controller checks before returning the system to normal operation.
ABB identifies 3HAB8101-8 as no longer for sale.
ABB lists CS-4003 as the replacement Product ID.
Do not assume CS-4003 is mechanically or electrically identical without checking the installed robot system.
Preserve the original DSQC 346G configuration information before replacement.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Ireland
|
Check 1771-IG TTL HIGH/LOW logic thresholds, field supply ripple and 1771-WC wiring before replacing an input module.
A field checklist for distinguishing Danfoss 060G2105, 060G1323 and 060G2109 by pressure range, fitting, loop signal and controller scaling.
A field checklist for separating 24 VDC input, carrier bus, output derating and alarm-contact faults before replacing an Emerson SE5009.
A controlled commissioning method for using the 140XSM00200 simulator to verify Modicon Quantum input mapping and interlocks before reconnecting field wiring.
A commissioning checklist for the ProSoft PLX32-EIP-MBTCP covering subnet separation, register contracts, EtherNet/IP timing, failure tests and replacement records.
A field checklist for IC693MDL916 relay commands, terminal blocks, load current, switching rate and contact-side measurements.
